MENU Tipmeter iTripcomputer H-51
Tripmeter H-51 | Specifications
Service – basics | Service during a rally
Connection | Configuration | Calibration | Operating modes | Azimuth mode operation.
Specifications | FAQ | Videos
Tripmeter H-51 operating modes
The manual contains a description of all available modes of operation of the tripmeter.
The H-51 does not include stand-alone DISTANCE, special section (STAGE) or other modes such as the iTrip H-101 tripmeter. The H-51 tripmeter always operates in commuting mode, which mainly involves measuring the distance travelled by the vehicle. For H-51 tripmeter equipped with the Azimuth routing function, there are three functions that appear during azimuth travel.
Operating modes of the H-51 tripmeter
Approximation mode (basic mode, single): mode for basic measurements, based on pulse or speed sensor signals.
- The short route – TRIP
- The long road – ODO
- Speed – SPEED
- Bat – supply voltage
- Course – direction of travel based on GPS*
- Time – hh:mm*
Azimuth sub-mode – function available when driving azimuth. The other measurement functions of the commuter mode work but cannot be called up on the screen.
- AZI – target indicator *, **
- AZC – distance to target *, **
- AZO – course to target *, **
** – only when Azimuth option purchased
* – only when built-in GPS module.
