The H-51 tripmeter is the ideal metrometer for off-road rally enthusiasts. The H-51 is a compact tripmeter suitable for cars and motorbikes or quads.
It provides a clear presentation of all measured values, simple operation and precision measurements. This is the perfect metrometer for measuring distances in a variety of configurations, always ensuring excellent precision. It can be connected simultaneously to two speed sensors to calculate the distance travelled. In addition, it is possible to equip the H-51 tripmeter with a GPS module, which enables distance measurement without the need for sensors or by enabling sensors to work with GPS data.

Main functions of the H-51 tripmeter

1. Distance measurement: enables precise measurement of the short (TRIP/PARTIAL) and long (ODO/TOTAL) distance travelled. Simultaneously displays one distance on the display and provides instant switching to a second distance counter
2. Short and/or long distance deletion: enables short and long distance deletion by pressing a button on the housing or a button on an external remote control
3. Long Distance Correction (ODO/TOTAL): allows long distance correction to +/- by pressing the arrows on the case or the buttons on the external remote control (optionally supplied)
4. Full correction of the long distance: allows any long distance value to be entered using the buttons
5. Countdown distance: allows the counting direction to be changed, e.g. in the event of straying or driving backwards
6. Speed measurement: enables precise measurement of speed and displays it on the screen
7. Supply voltage measurement: allows measurement of the tripmeter supply voltage which is also the vehicle’s mains voltage
8. GPS-based course indication: shows course (direction) on display
9. Time display: shows on the display the UTC time from GPS data, which can be corrected for time zone and summer/winter time
10. Waypoint routing: the H-51 tripmeter allows you to route waypoints based on the given course and distance to the destination, allowing you to reach the virtual waypoint faster and without errors, where the route description continues according to the distance

Distance measuring functions

1. Distance measurement based on speed sensors: the H-51 tripmeter allows connection of two speed sensors, from which it calculates the distance travelled
2. Distance measurement based on the built-in GPS module: the H-51 tripmeter allows accurate distance calculation without the need for speed sensors, solely on the basis of data from the GPS system
3. Mixed distance measurement based on speed sensors and GPS data:The H-51 tripmeter provides accurate distance calculation using mixed data from speed sensors and GPS. GPS data is overridden, but in the event of signal loss, the tripmeter switches automatically to data from the speed sensors
4. Calibration memory: the tripmeter has the ability to store up to 10 calibration factors relating to the speed sensors. This is equivalent to storing calibrations for up to 10 tyre types.

Readability of the display

The device provides a clear presentation of the values. A large LED display with a 20 mm digit height guarantees readability of the values even when driving in the wilderness.

Durability-one of the biggest advantages of the tripmeter

The robust steel casing, welded for tightness and rigidity, ensures reliability in the toughest conditions. Double seals against dust and water provide additional protection for the device. The wire harnesses are routed through hermetic feedthroughs and terminated with hermetic connectors.

You can expand the device

• built-in ultra-fast GPS module
• Routing azimuths based on the given azimuth and distance to the target.

Additional features

• so-called azimuth routing or waypoint routing and navigation to it
• memory of 100 points azimuth + distance to point
• azimuth routing without slowing down
• route visualisation on a Garmin device (NMEA IN/OUT protocol on Garmin device and physical RS232 port required)

Available accessories

1. Speed sensors: additional speed sensors can be used in conjunction with the tripmeter, allowing accurate monitoring of vehicle speed and precise distance measurement.
2. GPS module: the GPS module is an optional accessory built inside the metrometer. Decide on the version of the device before you buy.
3. Mounting bracket: an additional mounting bracket allows the iTrip H-51 tripmeter to be attached to the vehicle in a different way to the brackets included in the kit.
4. Flash drive: is an essential accessory for updating the tripmeter software and for transferring azimuth routing files
5. GPS antenna: more robust GPS antenna available, bolted to roof (hole required)