Na tej stronie dowiesz się:

The H-101 Tripmeter is the ideal tripmeter for measuring in off-road, cross-country or baja rallies. H-101 is a tripmeter suitable for cars, SSVs and trucks. The size of the housing rather excludes it from use on motorcycles.

It provides a clear presentation of all measured values, simple operation and precision measurements. It is ideal for distance measurements in a variety of configurations, always ensuring excellent precision.

It ensures a clear presentation of all measured values presented in 3 independent segments of red displays, simple operation and precision of measurements. This is the perfect tripmeter for measuring distances in a variety of configurations, always ensuring excellent precision. It can be connected simultaneously to two speed sensors to calculate the distance travelled. Additionally, it is possible to equip the H-101 tripmeter with a GPS module, which enables distance measurement without the need to use sensors or enables the sensors to cooperate with GPS data.

The H-101 tripmeter is a car tripmeter. It can be installed in cars or trucks, as well as in SSV vehicles. — *Tripmeter H-101. Front view*

The most important functions of the H-101 tripmeter

Distance measurement: enables precise measurement of the short (TRIP/PARTIAL) and long (ODO/TOTAL) distance travelled.
Short and/or long distance deletion: enables short and long distance deletion by pressing a button on the housing or a button on an external remote control
Long Distance Correction (ODO/TOTAL): allows long distance correction to +/- by pressing the arrows on the case or the buttons on the external remote control (optionally supplied)
Full correction of the long distance: allows any long distance value to be entered using the buttons
Countdown distance: allows the counting direction to be changed, e.g. in the event of straying or driving backwards
Speed measurement: enables precise measurement of speed and displays it on the screen
Supply voltage measurement: allows measurement of the tripmeter supply voltage which is also the vehicle’s mains voltage
GPS-based course indication: shows course (direction) on display
Time synchronization with GPS: allows you to synchronize the internal clock with the reference time from the GPS system
Waypoint routing: the H-100 tripmeter allows you to route waypoints based on the given course and distance to the destination, which allows you to reach a virtual waypoint faster and error-free, where the route description is continued by distance
In ADVANCED mode, it has 3 independent operating modes (H-101 Operating modes)
In ADVANCED mode, it has a TIMER function that allows you to enter the time (e.g. between PKC) and show the time remaining until PKC
In ADVANCED mode, it has the function of starting measurements with a delay declared by the operator
In ADVANCED mode it has a STOPWATCH function

Distance measuring functions

Distance measurement based on speed sensors: the H-101 tripmeter allows you to connect two speed sensors, based on which it calculates the distance traveled
Distance measurement based on the built-in GPS module: the H-101 tripmeter allows you to accurately calculate the distance without the need to use speed sensors, solely based on data from the GPS system
Mixed distance measurement based on speed sensors and GPS data: the H-101 tripmeter enables accurate distance calculation using mixed data from speed sensors and GPS. GPS data is overridden, but in the event of signal loss, the tripmeter switches automatically to data from the speed sensors
Calibration memory: the tripmeter has the ability to store up to 10 calibration factors relating to the speed sensors. This is equivalent to storing calibrations for up to 10 tyre types.

Readability of the display

The device provides a clear presentation of the values. It has 3 segments of red LED displays with a digit height of 14 mm. You can assign a default parameter to each display segment and call a different parameter to the indicated Segment at any time during measurements. The display guarantees readability of values even when driving off-road. The display is protected with foil.

Durability – one of the biggest advantages of the tripmeter

The robust steel casing, welded for tightness and rigidity, ensures reliability in the toughest conditions. Double seals against dust and water provide additional protection for the device. The wire harnesses are routed through hermetic feedthroughs and terminated with hermetic connectors.

You can expand the device

built-in ultra-fast GPS module
Routing azimuths based on the given azimuth and distance to the target.

Additional features

so-called azimuth routing or waypoint routing and navigation to it
creating files with azimuths directly on the device
memory of 100 points azimuth + distance to point
azimuth routing without slowing down
route visualisation on a Garmin device (NMEA IN/OUT protocol on Garmin device and physical RS232 port required)

Available accessories

Speed sensors: additional speed sensors can be used in conjunction with the tripmeter, allowing accurate monitoring of vehicle speed and precise distance measurement.
GPS module: the GPS module is an optional accessory built inside the tripmeter. Decide on the version of the device before you buy.
Mounting bracket: an additional mounting bracket allows you to mount the iTrip H-101 tripmeter in a vehicle other than the brackets included in the set.
Flash drive: is an essential accessory for updating the tripmeter software and for transferring azimuth routing files
GPS antenna: more robust GPS antenna available, bolted to roof (hole required)

More technical information can be found in the article: H-101 Specification.