MENU of the iTripcomputer Classic Tripmeter
Tripmeter Classic | Specifications
Operation – basics |
| Connecting | Configuration | Calibration |
| Technical data | FAQs |
Tripmeter Classic is a very simple tripmeter whose configuration is reduced to a minimum.
Selecting GPS as the source of distance measurement.
There are two sliding switches on the bottom of the case. The right one is responsible for turning the GPS on/off.
GPS switch in the LEFT position | GPS switch in the RIGHT position |
GPS enabled | GPS off |
The STATUS LED lights up green but flashes blue 1 time per second. | The STATUS LED lights up green. |
Pairing procedure with an Android device
Tripmeter Classic equipped with Bluetooth can be paired with a single mobile device, allowing measurement data to be transferred to that device. The pairing procedure is performed only once for each device.
Tripmeter Classic equipped with Bluetooth can work with a dedicated application. Data sent via Bluetooth can also be used in a phone or computer application. In the case of a Bluetooth-enabled tripmeter, setup also includes pairing the device with a selected phone or computer. After successful pairing, the tripmeter will be able to transmit data to the paired device, allowing additional analysis and control of measurements.
Attention. The tripmeter can work with one device at a time. A pairing procedure is required for operation. You perform it once for the selected device.
- simultaneously press the ODO_R and TRIP_R keys of the tripmeter
- while holding down the buttons, turn on the power of the tripmeter
- Wait 5 seconds – the display will show COD.
- On your phone , search for the name of the module (e.g. SPARK) and select it for pairing
- The display of the tripmeter will show the PIN number suggested by the phone-.
- On the phone, press the button that allows pairing with the module
- after successful pairing, the tripmeter will automatically go into normal operation
Data in Bluetooth transmission
- number of pulses from speed sensors
- tension
- temperature