Metrometer i-102. Front view

Do you dream of a metrometer that is not only precise, but also smart and gives you full control? Meet the i-102 metrometer – a device that will pique your interest!

The i-102 Metrometer is a master of precision, ready to take on the challenges of rallying cars, vintage cars and trucks. But that’s not all – its smart features will put you in full control of your measurements and navigation. Starting with a simple and intuitive interface, the i-102 metrometer offers, up to 9 buttons for easy operation. Thanks to its configurability, you will customize the metrometer to your individual preferences and needs. It’s your metrometer, according to your guidelines!

The i-102 metrometer not only provides precise distance measurements in a variety of configurations, but also presents them in an easy-to-read manner. Its unique screen with matte anti-glare film provides an excellent viewing angle, regardless of intense sunlight. The i-102 metrometer is also a full array of additional functions. With a built-in clock synchronized with GPS time, time and road control for each section of the rally, and Roadbook-based road correction capability at selected points.

Equipped with way-finding sensors that are constantly monitored, the i-102 metrometer not only provides accurate measurements, but also signals any problems. With intelligent traffic lights, remember that your metrometer is working flawlessly or respond immediately if any difficulties arise. Discover the i-102 metrometer – a smart, precise and customizable companion for your rally adventure!

The i-102 represents a new quality in the world of rallying. The operation has been significantly changed, and the menus have been divided into different sections. Basic parameters can be set in the Configuration menu, while measurement mode settings are available in new menus directly from the measurement mode. As a result, each measurement mode has its own dedicated menu, such as the Commute mode menu and the Regularity mode menu, which can be called directly from the measurement window by pressing the [MENU] button.

Key features of the i-102 metrometer

The i-102 represents a new quality in the world of rallying. The operation has been significantly changed, and the menu has been divided into different sections. New functions have been added to the metrometer:

the ability to change or adjust the coefficient during measurements, the change can affect the distance traveled from the start or be active from the moment of change
OS episode recorder saving episode parameters to file: speed, top speed, distance, time
no position called Start Screen, which means the metrometer is always in measurement mode,
screen in Regularity mode
screen in Metrometer mode, have been designed with a new layout for readability and intuitive navigation.
has a built-in clock synchronized with GPS time
has two trip meters
controls the time and route of each section of the rally
has the ability to correct the road based on Readbook on all or selected
does not calculate and check the average speed.

Distance measurement function – the basic task of a metrometer

The i-102 metrometer is an advanced device that provides reliable and precise road measurements, while offering additional features and configurability to meet a variety of rallying requirements.

Measurement of the road is carried out:

through one or two sensors of any design
Sensors are controlled at all times during the measurement – the results of the control can be seen without using the menu
sensors can work in different configurations: sum, faster wheel, slower wheel
in case of sensor failure, can continue measurements using data from GPS module

Expandability of the device

built-in ultra-fast GPS module
function RECORDER OF THE STAGE – allows automatic measurement of times on OS sections
REGULARITY function – allows measurements in rallies on the regularity of driving sports and vintage cars

Durability – one of the advantages of the tripmeter

Welded steel case:
Provides rigid construction and high resistance to mechanical damage.
Structure and attachment points:
Allows you to permanently attach the meter to the vehicle.
Impact resistance:
Accidental impacts to the meter will not affect its operation.
Limited dust and water resistance:
The case is not resistant to dust and water.

Additional features

can count or count the way
can correct the road manually from the buttons or based on the description from the Roadbook

Available accessories

driver displays:
metrometer offers the possibility to connect a driver display that can display any measured parameter. This allows you to customize the display of information according to your own preferences and needs.
erase buttons:
one-button or three-button resets can be attached to quickly erase measured data or reset specific parameters. These buttons make it easier to operate the rally meter during competitions.
function switches:
additional function switches can be connected to the metrometer to speed up operation. They are used to quickly switch between operating modes, set parameters or call up specific functions.

Precise measurements from sensors

The metrometer has two independent inputs for connecting road sensors of any design. To ensure the precision of the measurements, the inputs can work in different configurations:

works one input with one way sensor
works one input with one way sensor, a backup sensor is connected to the second input to make an instant change in case of failure
two inputs with two sensors work simultaneously. The tripmeter takes simultaneous measurements from two sensors mounted on the right and left sides of the vehicle, which increases the precision of the measurement.

When you use two sensors, you can also set the metrometer to count the distance from:

the wheel that generates more pulses , for example, if you have sensors on the rear wheels of a front-drive car and the car can lift the inner wheel in the corners, in the menu you select SUMA>> Faster
the wheel that generates less pulses , for example, if you have sensors on the front wheels of a front-drive car and the car can “buck” the inner wheel in corners, in the menu you select SUMA>> SLOWER

Measured values:

Measurements of the TRIP short path and ODO long path can be presented in one of three resolutions, which is chosen by the competitor using the metrometer

TRIP road: 1 m, ODO road: 1 m
TRIP road: 10 m, ODO road: 10 m
TRIP road: 10 m, ODO road: 100 m

The resolution of the ODO path distance indication also affects the value of its correction

ODO distance: 1 m, correction: +/-1 m (each press of the correction button)
ODO distance: 10 m, correction: +/- 10 m (each press of the correction button)
ODO distance: 100 m, correction: +/- 100 m (each press of the correction button)