Na tej stronie dowiesz się:

Characteristic features of the tripmeter

built-in GPS (GPS option)
Two independent sensor inputs summing the readings
in case of sensor failure, it is possible to switch to GPS calculation during measurements (GPS option)
illuminated buttons
contrasting LED display with a digit height of 14 mm
electronic protection of setting and measurement memory
clear indication of GPS status and range (GPS option)
Manual calibration of sensors and GPS
possibility of changing the coefficient during measurements
indicator lights

Tripmeter functions

name	functions	measurement range	resolution of indications
short distance measurement	deleting	+/- 999,9 km	+/- 10m
long distance measurement	deleting, correcting, entering	+/- 999,9 km	+/- 10m
countdown	yes
blocking accrual	yes
vehicle speed measurement			+/- 1km/h, +/- 1 mila/h
measurement of supply voltage		0V – 30V	+/- 0,1V
changing the parameter in the left LED window	yes

housing material	1.5mm steel sheet, plastic
method of connection	adhesive
anti-corrosion coating	zinc
sealing (hermetic version)	silicone gasket
attachment points to the vehicle	4 through
front finishing	foil facade with an LED filter

Diode name	destiny	does not light up	flashes blue
GPS	provides information about GPS status	GPS disabled or incorrectly set	GPS enabled and has a signal >5 satellites.